Mold news 2007-09

2007-09-13 American Chronicle: Mold Home Test Kits Expose the Dangers of Indoor Air

Use gloves (discard after use) and apply the sticky side of a piece of tape to the mold-infested area. Seal the sample inside a ziploc bag, and send it to a laboratory for testing. Meticulous care and handling should be taken in order not to disturb the moldy area as mold spores may spread to other damp areas of the home. You may choose to call a trained indoor air quality investigator to take the sample for you. Do not panic if the test identifies a toxic mold problem; there are remediation procedures that can effectively remove and eradicate mold.

www.americanchronicle.com

- Mold home test kits mold removal black mold allergies home improvement toxic mold

2007-09-26 Jackson Sun Jackson, TN

Piegirl, I happen to be a student at Westview that has suffered sicknesses I dont recall ever acquiring until this mold infestation had gotten this worse. Frankly I can tell you we had safety procedures done to make sure that none of the students were in any way hurt. Our point was to make sure people noticed how serious this problem was. Not only that but to keep this protest as civilized and peaceful as we could make it. We wanted to get the attention of the public so that this situation is handled. You saw our signs didnt you Thats what we wanted. But as far as wve been told, this protest is helping us fix the prob;em, so were very high in hopes to see it is fulfilled.

www.jacksonsun.com

The Jackson Sun - First in News, Jackson Tennessee news, sports, business, features, weather, real estate, classifieds, careers, breaking news at . - Jackson Tennessee jackson sun news sports announcements obituaries weather Jackson Tennessee TN Tenn newspaper news paper west tennessee west tenn real estate career relocate Gannett

2007-09-21

The K show serves as the Venus ranges official introduction to the rest of the plastics processing world and its international sales launch. One running a test mold in Ebermannsdorf was sufficiently quiet to draw positive comparisons to established all-electric machinery. Both the Venus and Mercury range of machines are based on the all-electric HTD machines Haitian introduced in 2006, but the basic HTD model has been upgraded for the Venus and will be improved even further for the Saturn, says Franz. Details on the exact nature of the upgrades were limited, but he says one key improvement is in response time and acceleration, which has been increased by more than 400 pct. Also new are higher-end Sigmatech controls that replace the Keba controls standard for all Haitian export machines.

modplas.com

2007-09-05 Sennheiser BW900 Bluetooth Wireless Office Headset Solution iLounge iPod Accessory Reviews

There are some other major changes to what weve come to understand as the standard Bluetooth headset mold. Sennheiser, for instance, makes no compromises on size in order to achieve unusually impressive audio quality: the microphone extends via gooseneck-style memory wire all the way down to your mouth, where its either exposed or covered by a foam windscreen, and the slightly rubber-covered ear speaker (with three sizes of covers) pivots to match the shape of your ear. By comparison with most headsets weve tested, BW900 consequently winds up looking somewhat bizarrelike an oversized navy blue and silver toyand doesnt fit neatly into a pocket for out-and-about use like its competitors. But theres a surprise.

www.ilounge.com

2007-09-22 Tips for Fighting Mold RISMedia

Once mold spores settle in your home, they need moisture to begin growing and digesting whatever they are growing on. There are molds that can grow on wood, ceiling tiles, wallpaper, paints, carpet, sheet rock, and insulation. When excess moisture or water builds up in your home from say, a leaky roof, high humidity, or flooding, conditions are often ideal for molds. Longstanding moisture or high humidity conditions and mold growth go together. Realistically, there is no way to rid all mold and mold spores from your home; the way to control mold growth is to control moisture.

rismedia.com

RISMEDIA, Sept. 24, 2007-( )-Without mold, we would find ourselves wading neck-deep in dead plant matter. And we wouldnt have great .

2007-09-14 Composites Technology - Inside manufacturing: tooling method replicates intricate woodgrain in fiberglass doors

Parts are molded; some are painted to check for flatness and others are stained to check for appearance. When Weber and no. x92;s quality team is satisfied with the results, test parts are sent to the customer for approval. When the tool is declared defect-free, it is sent out for chrome plating. Because Weber not only builds but also tests all its nickel tooling, each mold is certified production ready before it leaves Weber and no. x92;s facility. The nickel-shell tooling is then used to produce the fiberglass facing panels for entry doors.

www.compositesworld.com

2007-09-29 Wallaces Farmer

Storage and harvest management will be particularly important, says Hurburgh. Field damaged grain, regardless of reason, should not be mixed with good grain. Producers should harvest around water holes, downed grain and frost damaged areas. Do not mix damaged grain with good grain in storage either. Damaged or low test weight grain must be aerated immediately to reduce temperature and equalize moisture. Odor and mold color intensity may be abated as well by aeration, although strong "barnyard" type odors likely will not go away.

wallacesfarmer.com

Wallaces Farmer is the premier farm publication for Iowa producers and has served the market for more than 150 years. - Wallaces Farmer Swoboda corn soybeans hogs pork beef dairy BSE soybean rust farmers growers producers

2007-09-07 El Paso Times - If it is mold, be sure first before doing any work

At the insistence of the buyer, following the inspectors recommendation, a test was conducted at a cost of more than usd. 500 to determine whether it was in fact mold and whether it was black or brown mold. Of course, it turned out not to be mold; brown or black. Besides, I have never seen or heard of mold growing on a masonry fireplace.

What you really need to know is that healthy people usually have no reaction to mold. If a person has immunity suppression, allergies or asthma, it can be a problem. There is no need to have the mold tested because it should be removed no matter what. And there is no reason to call a remediation company for small areas.

www.elpasotimes.com

2007-09-03 Art for our sake - The Boston Globe

We also found innovation to be a central skill in art classes. Art classes place a high value on breaking the mold. Teachers encourage students to innovate through exploration - to experiment, take risks, and just muck around and see what can be learned. In ceramics, for example, capitalizing on error is a major consideration, says Balliro at the Boston Arts Academy. To a student struggling to stick clay together, she says, There are specific ways to do it, but I want you guys to play around in this first project. Just go with that and see what happens and maybe youll learn a new technique. " Teachers in our study told students not to worry about mistakes, but instead to let mistakes lead to unexpected discoveries.

www.boston.com

2007-10-04 Tri-Cities, Tennessee Personal News and Media Center

Its one of those things, black mold or any mold is not going to hurt you if you just walk through the building, Akard said. Its continuous, day-to-day exposure to a mold that causes you to have respiratory problems. . As far as any harm, long-term exposure is where the problems would be. Thats why its top priority. If we see any type of mold problem we try to address it as soon as we possibly can so that no one will have long-term exposure.

www.timesnews.net

The Kingsport Times-News Online delivers breaking news from Northeast Tennessee including Kingsport, Johnson City and Bristol, TN. In addition to regular local news and updates, this free site is a community portal for citizens to create articles, events, photos and other opinions about life in the Mountain Empire of the Tri-Cities, Tennesseee and Virginia.